home:mnhauke:GNSS

https://download.opensuse.org/repositories/home:/mnhauke:/GNSS/15.6/ openSUSE:Leap:15.6

openSUSE Leap borrows packages from SLE. The content of the build media is almost the same as the previous Leap, but the development is drastic different. It includes the binaries (instead of the sources) directly from SLE. https://lists.opensuse.org/opensuse-factory/2020-04/msg00165.html https://download.opensuse.org/repositories/openSUSE:/Leap:/15.6/standard/ openSUSE:Backports:SLE-15-SP6

Backports project for SLE-15-SP6

Backports project for SLE-15-SP6 https://download.opensuse.org/repositories/openSUSE:/Backports:/SLE-15-SP6/standard/ SUSE:SLE-15-SP6:GA

https://download.opensuse.org/repositories/SUSE:/SLE-15-SP6:/GA/pool/ SUSE:SLE-15-SP5:Update

SLE 15 SP5

SLE 15 SP5 https://download.opensuse.org/distribution/leap/15.6/repo/oss/ SUSE:SLE-15-SP5:GA

https://download.opensuse.org/repositories/SUSE:/SLE-15-SP5:/GA/pool/ SUSE:SLE-15-SP4:Update

SLE 15 SP4

SLE 15 SP4 https://download.opensuse.org/distribution/leap/15.6/repo/oss/ SUSE:SLE-15-SP4:GA

https://download.opensuse.org/repositories/SUSE:/SLE-15-SP4:/GA/pool/ SUSE:SLE-15-SP3:Update

SLE 15 SP3

SLE 15 SP3 https://download.opensuse.org/distribution/leap/15.6/repo/oss/ SUSE:SLE-15-SP3:GA

https://download.opensuse.org/repositories/SUSE:/SLE-15-SP3:/GA/pool/ SUSE:SLE-15-SP2:Update

SLE 15 SP2

SLE 15 SP2 https://download.opensuse.org/distribution/leap/15.6/repo/oss/ SUSE:SLE-15-SP2:GA

SLE 15 SP2

SLE 15 SP2 https://download.opensuse.org/repositories/SUSE:/SLE-15-SP2:/GA/pool/ SUSE:SLE-15-SP1:Update

SLE 15 SP1

SLE 15 SP1 https://download.opensuse.org/distribution/leap/15.6/repo/oss/ SUSE:SLE-15-SP1:GA

SLE 15 SP1

SLE 15 SP1 https://download.opensuse.org/repositories/SUSE:/SLE-15-SP1:/GA/pool/ SUSE:SLE-15:Update

SLE 15

SLE 15 https://download.opensuse.org/distribution/leap/15.6/repo/oss/ SUSE:SLE-15:GA

SLE 15

SLE 15 https://download.opensuse.org/repositories/SUSE:/SLE-15:/GA/pool/ gpsctl

Utility for U-Blox GPS receivers

A utility for querying, configuring, and using a U-Blox GPS. All configurations are done via /etc/gpsctl.conf. Some gpsctl functions work for any GPS streaming NMEA data over a serial port: * Echoes NMEA data to stdout, optionally filtered by NMEA message type. * Infers the GPS' baud rate from the stream of NMEA data. Other gpsctl functions are specific to U-Blox GPS hardware: * Configures the baud rate that the U-Blox GPS uses for communication. * Configures whether the U-Blox GPS transmits NMEA data. * Infers the GPS' baud rate using the UBX protocol only. * Configures the use of the European Galileo satellites (which is off by default in U-Blox 3.01 firmware) and enables NMEA version 4.1 output for Galileo. * Queries the U-Blox GPS for position, time, GPS version, GPS configuration, and GPS satellite information. The format of query results are selectable: either plain English or JSON. * Tests the pulse-per-second output of the U-Blox GPS (fundamental for NTP). * Configures the U-Blox GPS for maximum timing pulse accuracy (useful for building a stratum 1 NTP server based on the GPS' notion of time). * Disables NMEA RMC, VTG, GSA, GSV, GLL, GGA messages and enables ZDA (for NTP driver 20 mode 8) * Saves the U-Blox GPS configuration to on-module battery-backed memory. * Resets the U-Blox GPS. Note: The gpsctl binary was renamed to gpsctl_ph to prevent a naming conflict with gpsctl from gpsd-clients !!!